INFINITI Key Fob Battery Replacement

When you purchase a luxury INFINITI model to navigate Tallahassee roadways, you can enjoy features like the INFINITI Intelligent Key and remote start in the palm of your hand. But what happens when your battery dies? Follow the simple steps below to perform an INFINITI key fob battery replacement quickly and easily, including how to open an INFINITI key fob.

What Kind of Battery Goes in the INFINITI Key Fob?

Before you begin, you’ll want to make sure that you have the correct replacement battery on hand. The type of key fob you have will dictate the battery you need. A conventional INFINITI key fob will require a CR2025 type battery, while a key fob that’s been designed to work with an INFINITI Intelligent key will require a CR2032 battery instead. You can visit our parts center to make sure you get the correct INFINITI key fob battery replacement for your model.

INFINITI Key Battery Replacement Steps

• We’ll first address the steps of how to open your INFINITI key fob. Press the release tab on the back of your key fob to remove the metal car key.
• Once you’ve removed the metal key and the release tab, you will need to pry open the small panel that’s situated underneath. At this point, you should see the INFINITI key fob battery housing. We suggest using a flathead screwdriver with a small amount of tape around the end to avoid scratching or damaging your fob in the process.
• Replace the dead battery with a fresh one, making sure to position the positive side face-down in the fob.
• Reattach the small panel that you removed earlier in the process, and then reinsert the metal key along with the release tab.
• You’re ready to drive!

INFINITI Key Fob Battery Troubleshooting

If you notice a problem with your push-button start or your key fob keyless entry remote, these tips can help you get on Pensacola roads quickly or troubleshoot the problem:

• If your vehicle isn’t starting, your INFINITI key battery might be low. Try holding the key fob closer to the start button to reduce the energy needed to send a signal.
• If you can’t start your car using push-button start, the problem could extend beyond your INFINITI key fob battery. Try replacing the INFINITI key battery first, but if that doesn’t solve the problem, you will need to schedule a service appointment to have your vehicle’s battery checked.
• If your INFINITI key battery is dead, you can use the metal key in the back of your key fob to start your vehicle and lock and unlock the doors.

Visit our INFINITI Service Center Near Dothan, AL

If you run into any problems with the steps of how to open your INFINITI key fob or how to perform an INFINITI key fob battery replacement, the certified technicians at our Tallahassee service center are here to help. Call us at 866-984-2856, or drop by, and we will get your key fob in working order and get you back on your way in a flash.

These recommendations may become outdated over time or differ from recommendations for older vehicles. To ensure accuracy, always consult your owner’s manual or a certified OEM mechanic.